09/04/13

•   Added Imaging SwitchFire for all HELIX units
•   Added Side/Side Combo View
•   Added Chart/Side/2D Combo View
•   Added Chart/DI/2D Combo View

•   Added Contrast to 2D SONAR
•   Added CHIRP Configuration menu under the Setup tab
•   Changed Snapshot Functionality

o Snapshots are now captured by using Mark (Press & Hold)
o Taking a snapshot will no longer laydown a waypoint unless you turn on Screen

Snapshot Waypoint under the Accessory Tab
 Added keypad shortcuts to 2D, DI, and SI Views to adjust Frequency and Sensitivity.

o The Check Key now changes Frequency.

o The +/- Keys now adjust Sensitivity.  Added Mark Menu

o Pressing Mark with an active cursor will now bring up a new menu which gives the user the option to mark a waypoint at the cursor or mark a waypoint at the vessel position

o You can also double press Mark to quickly lay down a waypoint at the cursor  Added Navigation Menu

o All navigation events will now be listed under the Go-To menu.

•   If you press Go-To without an active cursor it will bring up the Go-To menu withan option to go through the Nav Data and select a route or waypoint to navigate

  too.

•   If you press Go-To with an active cursor it will bring up the Go-To menu withtwo options, Go-To Position and Nav Data.
•   If you press Go-To while highlighting a route it will bring up the Go-To menuwith different options for navigating the route as well as the option to navigate to the cursor and the option to go through the Nav Data to select a waypoint or another route to navigate too.

 Added Base Layer & Overlay Menus to Humminbird Chart Tab

o These menus will only populate if you have a LakeMaster chart card that supports multiple layers. (LakeMaster Plus, ChartSelect, and ZeroLine cards)

o The default Base Layer will be a Satellite image. If multiple satellite images exist it will choose the latest image.

o The default Overlay will be the 2D map.
o Changing any of the defaults will add a menu called Base/Overlay Reset which will

reset the Base Layer and Overlay to their default settings.

 Added Standby Mode
o The Standby menu is located in the Power menu and when the unit is put into standby

mode the display will turn off, and sonar will stop pinging.
o Press the power button to bring the unit out of Standby mode. The unit will not react to

any other key presses while in Standby mode.  Added new layers for AutoChart Live

o You can now create maps of the Bottom Hardness and Vegetation  Added support for Minn Kota’s new motors

o Added Circle Mode
o Added Follow-the-Contour functionality for AutoChart Live’s new Bottom Hardness and

Vegetation layers
o Added a virtual remote

o Added a power button remote

 Added support for the HB 2124 CHIRP RADAR